defem: Mesh Trays & CombiRacks

Defemmesh trays 99 Technical information B225191 Use and installation 80 41 Pre-assembled joining fitting (Fittings B1, B2, Bolt and Nut B13). Used for joining of the side sections. Mount Joining set B52 on the side section. Tighten the bolt and the joining is finished. Note! For joining of 320 mm trays and wider, extra Fittings B2 need to be mounted with Bolt and Nut B13 in the bottom of the trays. Joining set B52 For mounting of Mesh trays 53-622 onto wall and floor. 55 23 53 B4 B4 mini Mounted to wall/ceiling/ floor with Expansion bolt in middle hole or screws in corner holes. The side wires of the tray are easily hooked onto the grips of the bracket. For horizontal mounting with bottom or side of tray onto the bracket grips. The mesh tray can also be mounted vertically. The mesh tray can also be mounted with 45º angle. For increased stability, the B4 grips can be closed around the wires. Mesh trays are mounted onto Combi Fitting B21 with Bracket B4 or B4 Mini. The Mesh tray can also be mounted to floor. 85 95 30 10 Bracket B4/B4 mini B4 B4 Mini P130025 P130026 P125970 B224674 B224791 B224755 B224756 B224761 B224763 B224758 B224760 P125971 P125972 P125850 P125860